-
Milling-turning compund lathes
-
CNC lathe with inclined rail
-
Flat-bed CNC Lathe
-
Engine lathe
-
Vertical machinging center
1、spindle:The spindle is structured with high-power,large-torque,and high-precision sleeve,characterized by increased reduction ratio and good low-speed performance.
2、Turret:The hydraulic turret is configured with the driving cutter of the hydraulic motor,crankset positioning and hydraulic clamping mechanisms of high rigidity,or a high-speed servo turret is used.
3、X/Z-axis:It is driven by a high-grade imported precision ball screw with the roller guide widened and span increased,thereby with standing heavy cutting.
4、Tailstock:Automatic programmable tailstock for easy operation and application
Item | unit | G-500/3000 | G-500/2000 | G-500/1500 | Remark | |||||
Working range | Maximum spinning diameter | mm | Φ720 | |||||||
Maximum turning diameter of disk parts | mm | Φ530 | ||||||||
Maximum machining length | mm | 3200 | 2200 | 1600 | ||||||
Saddle inclination against the level | ° | 45° | ||||||||
Spindle | Spindle motor | kw | 22/26（continuous/30minutes） | 15/18.5（continuous/30minutes） | ||||||
Spindle end | A2-11 | A2-8 | ||||||||
Diameter of spindle through-hole | mm | Φ115 | Φ93 | |||||||
Maximum rotational speed of spindle | r/min | 1500 | 3000 | |||||||
Spindle precision | mm | Radial clearance≤0.008, axial clearance≤0.005 | ||||||||
Coordinate axis | Maximum travel along the horizontal direction(X-axis) | mm | 340 | |||||||
Maximum travel along the vertical direction(Z-axis) | mm | 3200 | 2200 | 1600 | ||||||
X-axis serve unit | 18Nm,3000r/min | |||||||||
Z-axis serve unit | 18Nm,3000r/min | |||||||||
Maximum feed rate along the X-axis | m/min | 20 | ||||||||
Maximum feed rate along the Z-axis | m/min | 20 | ||||||||
Positioning precision | mm | X±0.006,Z±0.011, | ||||||||
Repeated Positioning precision | mm | X±0.003,Z±0.003, | ||||||||
Tool post | Type of tool post | Hydraulic turret(optional servo turret) | ||||||||
Number of tools | 8-station | |||||||||
Specification of outer diameter and end face tool holder | mm | 32X32 | ||||||||
Diameter of inner hole tool seat | mm | Φ50orΦ40 | ||||||||
Clamping device | chuck | 12"three-jaw medium solid oil pressure chuck | 10"three-jaw medium solid oil pressure chuck | |||||||
Hydraulic cylinder | Medium solid rotary cylinder | Medium solid rotary cylinder | ||||||||
Hydraulic tailstock | Maximum travel of the center sleeve | mm | 120 | |||||||
Taper of the center sleeve | MT5 | |||||||||
Hydraulic system | Oil tank capacity | L | 60 | |||||||
Hydraulic pump pressure | kg | 35 | ||||||||
Chip removal | Auto chip conveyor | Chain plate type chip removal conveyor and chip collecting truck | ||||||||
Others | Total capacity of lathe power supply | kw | 34 | 27 | ||||||
Boundary dimension：length x width x height | mm | 6100x2200x2400 | 4900x2200x2400 | 4300x2200x2400 | ||||||
Net weight of lathe | kg | 11000 | 8500 | 7200 | ||||||
